UPnP
Universal Plug and Play (UPnP) is a network protocol that allows compliant devices
to automatically set port forwarding rules for themselves.
This application can automatically open some ports on your router to allow you
to access server from outside of network.
This feature will only work if your router connects to the Internet with a public IP address assigned.
Currently, most of mobile networks don't support UPnP.
Please make sure that router supports UPnP and it is enabled!
How to enable UPnP on router
TPLink New UI
- Login to the router
- Click on Advanced tab on the top
- Click Forwarding or NAT Forwarding from the left menu
- Click UPnP under the Forwarding section.
- Click Enable if the current UPnP Status is Disabled
- Click Save
TPLink Old UI
- Login to the router
- Click Forwarding from the left menu
- Click UPnP under the Forwarding section
- Click Enable if the current UPnP Status is Disabled
- Click Save
ASUS RT-AC66U
- Login to the router
- Go to the WAN section under advanced settings from the tab to the left
- Check Enable on the option Enable UPnP
- Click Apply to save the settings
LinkSys router
- Login to the router
- Click on the Administration tab
- Check Enable on the option UPnP
- Check Enable on the option Allow Users to Configure
- Click Save to save the settings
- Next, click Setup > Advanced Routing
- On the NAT part, select Enabled then click Save Settings
NETGEAR router
- Login to the router
- Click on Advanced at the top of the screen
- Click on Advanced Setup at the side of the screen, and then click UPnP
- Check the Turn UPnP On box to enable UPnP
- Click Apply to Save the settings
Buffalo AirStation
- Login to the router
- Click the "Advanced Settings" tile
- Click on the "Security" tab on the left, then click on the UPnP subtab
- Check "Enable", then click Apply at the bottom of the screen
dd-wrt
- Login to the router
- Click on the NAT/QoS tab
- Click on the UPnP tab right below
- Click “Enable” next to the UPnP service line
- Click Save and Apply Settings
D-Link DIR series router
- Login to the router
- Go to the ADVANCED tab, then click on ADVANCED NETWORK
- Under the UPNP heading, tick the box labelled Enable UPnP
- Click Save Settings to apply the new settings
Buffalo WZR2-G300N Router
- Login to the router
- Click the Gaming Ports tile
- Check Enable, then click Apply at the bottom of the screen
Huawei
- Login to the router
- Click Home Network from the top menu
- Click LAN Interface from the left
- Scroll to the bottom and click the heading UPnP to show options
- Ensure Enable UPnP is ticked
- Click Save
Tenda FH1201
- Login to the router
- Click on the Advanced tab
- Click on UPnP in the left menu
- Check the Enable UPnP box to enable
- Click Save